Addendum to my previous email:
After dunking the nut that I made in LN2 for a while (up to 10 minutes) and
hitting it with a hammer (not too hard, but I wasn’t gentle) and bouncing
it off the floor a bunch of times, it seems to do okay at low temperatures.
And the threads on the Oxford caps I have are M19x1, which is a weird size.
If the threads on yours are about 1mm larger that would be an M20 thread
which is not a weird size. I still think your best bet is going to be
fabricating your own.
Cheers,
Mike
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#525): https://urldefense.com/v3/__https://ammrl.groups.=
io/g/main/message/525__;!!PvDODwlR4mBZyAb0!XFA9OQAY71AyTEGj4HtiZrQTx4qapLFo=
Bsmpbz-C97GJLLc3Cnln9G5JnQlGI6NgTj-VUw1X3TLnppRffg$
Mute This Topic: https://urldefense.com/v3/__https://groups.io/mt/101077574=
/7559972__;!!PvDODwlR4mBZyAb0!XFA9OQAY71AyTEGj4HtiZrQTx4qapLFoBsmpbz-C97GJL=
Lc3Cnln9G5JnQlGI6NgTj-VUw1X3TJ5a9RfMA$
Group Owner: main+owner_at_ammrl.groups.io
-=-=-=-=-=-=-=-=-=-=-=-
Received on Fri Sep 01 2023 - 15:04:43 MST