Thanks to all for your useful suggestions/tips to troubleshoot the communication
problems. I was able to telnet to spect and all the fuses on the console are
fine. Looks like it is the boards in the AQS rack. Getting help from Bruker to
fix the hardware problems.
Will post an update on how it goes.
thanks again.
Kumar
Quoting pichuman_at_oak.cats.ohiou.edu:
> Hi all:
>
>
> We are having communication problems with our Avance 300 and we cant
> run
> anything and the system is down.
>
> Error light blinks in the LED's of slot2 (RXAD400), slot4(SGU400),
> slot5
> (SGU400) of AQS/2 rack of the console.
>
> I rebooted the console and the desktop few times and the problems
> still is
> there.
>
> Also, i tried "ii" and "cf" from topspin command window. For "ii",
> it gives the following error msg " BirdRack flush: communication
> error
> with AQS rack master.time out or device locked or not connected".
>
> When i type in "cf" command, error msg was " cant read AQC rack
> configuration. error during powerup of RX22-1".
>
> I checked the network connection to the console from the desktop
> (using
> ping command) and network connection is alive and working.
>
> Appreciate any suggestions to fix these issues.
>
> sincerely
> Kumar
>
Received on Tue Apr 11 2006 - 16:58:34 MST